Wireless Immobilizer Car Engine Lock Anti-hijacking on Off Intelligent Circuit Cut Off Alarm Au X

NOTICE:
When not using the system, turn the remote off for extended battery life. This product is not waterproof.
Description:
*1. Unit: 48*26*15mm
*2. Remote: 33*33*4.5mm
*3. Packaging Box: 165*92*48mm
*4. Weight: about 0.2kg
*5. Unit Working Voltage: 12V±3V
*6. Unit Quiescent Current: 12mA
*7. Unit Control Current: 30A
*8. Remote Control Operating Current: 3~8mA
*9. Remote Control Standby Current: 1uA
*10. Remote Control Battery: CR2032
*11. Remote Control Frequency: 433.92MHz
*12. Applicable Models: 12V gasoline car/12V motorcycle
*13. Installation Location: oil pump fuse (directly replace the original car fuse)
*14. Product Function: cut off the oil and turn off the engine
*15. Features: fast installation, non-destructive plug-in, stable performance
Package Includes:
1 x Unit with Wire(Fuse=15A)
2 x Sensor Remote
1 x User Manual(English)
Features:
*1. Circuit hidden lock mode (no short-circuit ring is inserted in the unit inside); factory default mode
*2. If the car does not receive the signal from the remote control within 16 seconds after starting the car, the engine will turn off. The car can start normally if it
*3. Support Manual and Auto modes. Manual: press the remote control every time or immediately after start-up; Auto: Just carry the remote control with you.
*4. LED indication function: When receiving a remote control signal, the LED flashes once, indicating that the signal is normal, and no signal will not flash.
*5. How to Install: First open the fuse box, find the oil pump fuse and pull it out, then replace it with the red wire plug. Keep the original fuse in a safe place, fix the main unit with a tie and cover the fuse box.
Anti-robbery mode: (the host inserts a short-circuit ring)
*1. When the host receives the signal from the remote control, the car can start normally, and it needs to continue to receive the signal from the remote control in the middle, otherwise it will turn off after 30 seconds if the signal is not received.
*2. LED indication: when the signal from the remote control is received, it flashes once for 1 second; when the signal is not received, it flashes 2 times per second for 11 to 20 seconds; when the signal is not received for 21 to 30 seconds, the LED flashes 4 times per second. (After 30 seconds and more, the signal LED does not light.)
*3. The remote control in anti-robbery mode must turn on the automatic mode, otherwise it will turn off halfway due to no signal received.
How to use the remote control
Please keep the remote control alone, do not mix with the car keys to increase the difficulty of grabbing. Coding learning: Press the host computer learning code switch to let go, immediately press the remote control button, the relay in the host will beep 3 times to indicate that the code learning is successful, and the method for learning the second remote control is the same as above. Up to 2 remotes can be learned. The code has been learned well when leaving the factory, and there is no need to