VR – Hydraulic Brake Park Lock 1/8NPT Manual Brake Line Lock Pressure Hold For Disc Drum Free

VR RACING – New Brake lock line lock hydraulic brake park lock pressure holder for Disc Drum VR3317
Application:
Universal.
Specification:
100% quality assurance tested, more responsive, less expensive, easier to install.
Uses hydraulic line pressure to temporarily hold brakes.
Brings a much better overall braking performance.
Material & Color:
Material: made of high qualityAluminum.
Color: as picture.
Package Included:
1xHydraulic Brake Park Lock;
2x 1/8NPT Ports. (100% Brand New Never Used Or Installed)
Installation Instructions:
1.Use the two 0.25″ body holes to secure the valve to a mount.
2.Connect the lower port to the pressure line coming from the master cylinder.
3.Connect the line going to the rear brakes to the upper port.
4.Bleed brake system of all air in the lines and don't push down on the knob.
5.Check for any leaks and make corrections before proceeding.
Cautious:Unit must be mounted in a location that is easy to reach from the driver's seat while pressing on the brake pedal so that you can set the lock.
Operation:
Setting the Park Lock: Depress the brake pedal, push the knob down and release the brake pedal.
Releasing the Park Lock: Push the brake pedal slightly harder than before and it releases automatically