Universal 12-24V Remote Control Receiver For Auto Gate And Curtain 433 mhz Remote Control With

Universal 12-24V Remote Control Receiver For Auto Gate And Curtain 433 mhz Remote Control With Rolling Code
Garage Door Gate Receiver For 99% of the 433mhz remote control in the marketDescription1. Power supplyDC 9V-24V2. Frequency433.92MHz 433MHz3. CodesFixed / Learning / Rolling Code4. Channels2 Channel5. Working temperature-40- + 806.Built in Aerial antennaReception range 30-100m7.Controlcapacity1408.Package:1PCS Receiver+2PCS remotes
LED:
1.When electrified, LED lights 1 second, it’s ready to work.2.LEARNING CODE:press P1 (1 second at least), LED lights (1 second) and goes off( 1 second) and lights again, now press anybutton of the remote, if the code is learnt LED will go off. Then release the button of the remote. If the remote cannot read the signal, LED will light for 10 seconds and finish learning status.A.press P1 one time, LED flashes one time and the first channel (monostable) activates.B.press P1 three times, LED flashes three times and the first channel (bistable) activates.3.PROGRAMMING METHOD:Each channel can learn 140 codes at least.It supports all the codes including fixed code and rolling code.4.DELETING FUNCTION:A.Delete one code: Press P2 for about 1 second and release, LED lights, press the button that you want to delete the code. Then it’s ok. B.Delete all the codes: long press P2 for 8 seconds, LED lights, release your hand and LED goes off, now all the codes are deleted.5.NOTICE:A.since the data of rolling code is relatively bigger, it’ll take you a little more time to operate remote with rolling code than that with fixed code.B.If you learning same code for more than one time, only the last code is memorized
About our workshop