Papatools PFS-200 hand stamping bag sealer (mechanical transformer steel shell) 2mm wide welding edge

Durable Powder Coated Steel Frame, No Physical Deformation
Mechanical Transformer, Real Capacity; Welding
Give a set of pre-heated wires

Product INFORMATION
+ Brand: RUIXIANG
+ + Model: PFS-200
+ Power: 300W
+ Welding line length: 20cm
+ Welding edge width: 2mm (not picky bag)

Instructions for using the hand stamping bag welding machine
1. Plug in the power (at this time the power light is not on)
2. Adjust the heating time corresponding to the thickness of the bag
2. Place the edge of the bag to be welded on the solder line between the machine
3. Put your hand on the top of the control lever, press the lever down, press the 2 mouths of the bag, at this time the machine will have a bright red light, and at the same time generate heat to melt the nylon and stick together.
4. When the light turns off, the welding process is complete.

Attention when using hand stamping bag welding machine: – The edge of the welding bag should be shorter, so that the solder line is always tighter and more beautiful
– Need to adjust so that the welding wire is always tight during use
– Depending on the type of thick and thin nylon, the welding time (heating time) is different
– If the stickiness of nylon is not satisfactory, you can adjust the welding time on the control knob, turn it to the right to increase the time, turn the left to reduce the welding time.
– Adjust the heating time just enough, do not adjust the excess heating time. – Adjusting the heating time too long will lead to plastic melting, sticking to the fabric film. Fabric film will quickly be damaged, consume more electricity, the life of the machine will be affected.