Dc New Autumn And Winter Motorcycle Modification With Sealed Electric Handle Luxury Electric Han

: Cs-095k1
net Weight of the Product: 220g
product Gross Weight: 244g
[packaging Method]: Color Box Packaging
Packaging Size : 14.5×10.5×5.5cm
Product Material : Nitrile Rubber
: Black
[handle Length]: Left Handle: 125mm; Right Handlebar: 127mm
[handle Diameter]: Left Handle Diameter: 22mm; Right Hand Handle Diameter: 25mm
[input Voltage]: Dc12v
: Adjustable From 15W to 35w
[working Ring Mirror Temperature]:- 20C+50C
Handle Type : Sealed and Passable Electric Handle
Switch Type : Multi Level Adjustable Switch
Applicable Models : 12V Motorcycle, Electric Vehicle
Installation Instructions :
1 First, Remove the Left Handle of the Original Car
2 Wet the Inner Hole with Soapy Water on the Left Hand, and Do Not Twist It Too Much During Installation. the Power Cord Should Leave Enough Wire for Rotation
3 When Installing the Balance Iron with the Left Handle, Adjust the Position of the Balance Iron to Be Slightly Separated From the Handle. When Tightening the Screws, Do Not Squeeze the Handle. If the Left Handle Slides on the Steel Pipe During Use, Remove the Balance Iron and Fix It with A Few Drops of 502 Glue From the Tail of the Handle
4 the Accelerator Only Needs to Release the Soft Rubber, Remove the Soft Rubber, and Install the Right Handle. the Oil Wrench Does Not Need to Be Removed
5 Wiring Method: Connect the Red Wire to the Positive Pole of the Power Supply and the Black Wire to the Negative Pole of the Power Supply (note: Do Not Connect It in Reverse)
:
1 the Right Handlebar Without Throttle Core Has A Larger Inner Diameter and is Suitable for Models Where the Throttle Core is Not Suitable for Disassembly
2 the Product Adopts A Horizontally Wound Heating Wire Structure, Which is Much More Complex Than Other Structures on the Market. However, the Force is Evenly Distributed During Rotation, Providing Excellent Comfort. the Heating Power and Electricity Consumption Are Only Half of Similar Products, and the Heating Effect is Better. It is A Truly Efficient and Energy-saving Electric Heating Handle
3 the Handle is Made of High-temperature Resistant Nitrile Rubber and Molded in One Go. It Features An Ultra-thin Electric Handle Switch and A Detachable Lid That Can Be Sealed and Freely Switched for Use
4 the Advanced Electronic Temperature Control System Does Not Consume Power and Can Better Protect the Battery. the High-quality Handle Switch is Even More Exquisite Than the Original Handle
5 the Product Wire Adopts A Silicone Sheath, Which Can Be Used in Extremely Low Environments. Silicone Has Excellent Aging Resistance and Will Not Age Over Time (older Wires Do Not Have Silicone Protective Covers)
[precautions]:
1 When Installing the Left Handle, Do Not Twist It Too Much, as Excessive Twisting Can Cause the Heating Wire to Shift; the Handlebar Only Replaces the Rubber Handle Part Outside the Original Throttle Ring, Without Replacing the Throttle R