Copier433MHZ Universal Remote Control with 4 Code Buttons for Garage Door / Gate Gantch

Specifications:

Material: Plastic

Nominal voltage: 12 (V)

Rated current: 10 (mA)

Working voltage: DC12V (including 27A12V battery grain)

Working current: 10mA @ 12V

Radiated power: 10mw @ 12V

Transmission frequency: 433MHZ

Transmission distance: 120-150M

Color: black

Size: 54*30*14mm

Cloning chip types:

2260 (pt2260, sc2260, lx2260, hx2260); 2262,(pt2262, sc2262, lx2262, hs2262, hx2262), pt2264, pt2240 (lx2240),1527 (ev15 hx1527), fp527, cs5212, ht6012, ht6013, ht6014 pic16f630 and so on. Different chip manufacturers have different prefixes chip models, as long as the digital portion of the chip can be the same model.

Operation method:

Step 1-delete the existence code from our remote duplicator

-press and hold buttons “A” and “B” together-the LED will flash 3 times

-press and hold the “A” button and release the “B” button

-hold down button “A” and press button “B” 3 times, the LED will start flashing non-stop

(Attention: During the switch-off procedure, make sure you keep the “A” button pressed all the time)

-Set both remote controls to the “back to back” position. Check that they have direct contact.

Or the two remotes should be placed as close together as possible (place the two remotes on the table next to each other).

Hold until the remote duplicator LED flashes, you have successfully cloned (other buttons follow the same operation as above).

For the presence of noise, you must have interference to operate, it is not successful if the copy, it must be re-copied after clean the code