4mm LED Strip Light SMD 2835 120LED/m 5 Meters 12V Not Waterproof White Warm Natural Flexible Strip

4mm Narrow LED Strip Light 2835 120LED/m 5 Meters 12V Not Waterproof White Warm Natural Flexible Strip LED Tape With DC Connector For Bedroom Kitchen Cabinet Lighting Decoration  Specification:LED Type: 2835 SMD LED Strip LightsQuantity of LED: 600 LEDs, 120LEDs/mColor Temperature: Cold white 6000-6500K, warm white 2700-3500K, natural white 4000-4500KLuminous flux: 2400lmVoltage: DC 12VIP Rating: Non-Waterproof (IP21)Packages: 16.4Ft/RollDimension (mm): (L)5000 X (W)4PCB Width: 4mm  Features:[600LEDs & High brightness]: High density 600 LEDs SMD2835 LED beads, more than ordinary LED strip beads(300LEDs). and Higher luminous efficiency and brightness as the ordinary 2835 light strip.[4mm width]: The width of this light strip is only 4mm, while the width of the ordinary light strip is 10mm. This light strip is not only brighter than ordinary light strips, but also saves space.[Convenient & Safe]: The LED strip has a DC female connector, which can be directly connected to the power adapter (the power adapter is necessary but not included, Recommend to use 12V 3A power adapter ), which is very convenient. The input voltage of our products is 12V, which is very safe and touchable.[Dimmable]: The brightness of the strip light is adjustable. You can buy a controller to adjust the brightness of the strip light.[Easy to Install]: You can cut the light strips between every 3 LEDs along the cutting line without damaging the other strips. The double-sided tape on the back of the light strip allows the light strip to be installed on any clean, dry and flat surface.[Widely Applications]: This LED strip is not waterproof and can only be used indoors. Widely used in lighting decorative of home, bars, kitchen cabinet, living room, mirror, cars, cinemas, hotels, trucks, bedroom, corridors, clubs, parties, Christmas, Halloween, etc.  Installation Steps:1.Clean the flat surface where the light strip is to be installed;2.Peel the backing strip from the adhesive tape;3.Press the light strip firmly on the surface to be installed;4.Connect the DC connector of the light strip to the power supply(power is not included). Kindly Note:1.This product does not include a power adapter and controller. you need to buy them yourself.2.Supply voltage of this product is DC12V, never connect to DC 24V or AC220V.3.Never connect two wires directly in case of short circuit.4.Please unroll them for heat dissipation when testing more than 2 minutes.5.Recommend to use 12V 3A power adapter for 16.4ft  Two models are available: (1) No DC Connector: 5m in a roll Led strip (Not include any power supply, controller and connector).  (2) With DC Connector: 5m Led strip with DC female connector.