433Mhz DC12V 1CH Wireless Remote Control Switch Relay Receiver Module + 2 RF Transmitter

Wiring type: fixed terminal
Standby Current: <5MA
Input Power: DC10V-14V
RF Frequency: 433Mhz
Receive sensitivity: >97dbm
Output Terminal: NO , NC , COM
RF working mode: superheterodyne
Decoding mode: MCU software decoding
Transmitting distance: >100m ( open space)
Support remote type: Learning code, Fixed code(Rolling code can be design)
Working mode: Momentary, Toggle, Latching Time delay (5s ,10s ,15s )

About Working mode:
– Momentary: Push the remote button, the relay connects, release the remote button, the relay dis-connects.
– Toggle: Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
– Latching: Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
– Time delay mode: Push the remote control button, the relay connects, from when release the remote button, after 5s or 10s or 15s, the relay disconnect automatically.

1. Learning the code: (Momentary)
Push the learning key on the receiver once time, it comes into momentary setting mode.
Wait for a moment, the LED will be off , it comes into learning state.
Push the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds, the LED indicator will be on again, learning successfully.

2. Learning the code: ( Toggle )
Push the learning key on the receiver twice time , it comes into toggle setting mode
Wait for a moment, the LED will be off , it comes into learning state .
Push the remote button, LED indicator on the receiver board will flash then come off.
After 3 seconds , the LED indicator will be on again , learning successfully.

3. Learning the code: ( Latching )
Note: When you choose for latching mode , in order to learn more remote control, you need to learn two different button, the first time learnt is for “ON”, the second time learnt for “OFF”.
For example: button A = ON , button B = OFF
Push the learning key on the receiver triple time , it comes into latching mode.
Wait for a moment, the LED indicator on the receiver board will flash then come off.
Push the remote button A.
LED flash for 5 times.
Push the remote button B.
LED flash for 5 times.
After 3 seconds , the LED indicator will be on again , learning successfully.
A = ON , B = OFF.
4. Learning the code: (Time delay mode )
Push the learning key on the receiver forth time , the time dealy for 5 seconds .
Push the learning key on the receiver fifth time , the time delay for 10 seconds.
Push the learning key on the receiver sixth time , the time delay for 15 seconds.
The LED indicator will be off .
Push the remote button , LED flashes and off .
After 3 seconds , the LED indicator will be on again, learning successfully.
Package included:
2 X Remote Control Transmitters (including battery)
1 X Remote Receiver Module (including Shell)