CELERA Car Engine Flushing Oil 1L JI13009

FLUSHING OIL is a special solvent-free, detergent/dispersant chemistry oil system cleaner, designed to assist in the removal of soft sludge, deposits and rust during engine oil changes.
It is formulated from low viscosity base oils and an effective detergent package.
With excellent solvency properties, it assists in removing oxidized oil deposits from circulating oil systems and engine crankcases during flushing.
Specially designed to clean all gasoline and diesel engines with/without after-treatment systems and for normal or low SAPS applications, being compatible to both mineral and synthetic engine oils.
It is, also, suitable for the flushing of manual transmission and differential systems.
SERVICE INSTRUCTIONS
The following steps should be followed if intended to use:
Warm up engine.
Stop engine and drain the oil while the engine is still warm.
Fill sump to a minimum 50% of its capacity with FLUSHING OIL.
Start engine and leave it at idle for 20 minutes.
Switch the engine off and THOROUGHLY drain the FLUSHING OIL.
Replace sump plug and change oil filter.
Fill with fresh, fully formulated oil
CAUTION: CELERA FLUSHING OIL is not to be used as engine oil.
All orders are legally invoiced with VAT (upon request) Please message us and provide the ff. Business Name: Business Address: TIN no.: